Home / Blog / Maintenance

How Often Should You Change Your HVAC Air Filter?

By The Sturdi Home Solutions Team2 min read

Quick answer

Change a standard 1-inch HVAC filter every one to three months, and a 4- or 5-inch media filter every six to twelve months. Change it more often if you have pets, allergies, construction dust, or heavy pollen. During peak heating and cooling season in Chattanooga, checking a 1-inch filter monthly is a good habit.

Key takeaways

  • 1-inch filters: every 1 to 3 months. Thick media filters: every 6 to 12 months.
  • Pets, allergies, and Chattanooga's spring pollen all mean changing more often.
  • A MERV 8 to 11 filter is the right balance of filtration and airflow for most homes.
  • A clogged filter raises energy bills and can make your system overheat or freeze up.

It’s the cheapest, easiest maintenance you can do for your heating and cooling system, and it’s the one that gets forgotten most. Here’s how often to change your filter and how to pick the right one.

How often should you change a 1-inch filter?

A standard 1-inch filter should be changed every one to three months. The thin pleated filters sold at hardware stores load up quickly, especially when your system is running hard in January or July.

A simple rule: check it every month and change it when it looks gray or you can’t see light through it.

How often should you change a 4- or 5-inch media filter?

Thicker media filters, the 4- or 5-inch kind that slide into a cabinet next to the furnace, have far more surface area. They usually last six to twelve months. Check the manufacturer’s recommendation on the filter itself.

When should you change it more often?

Change your filter sooner if:

  • You have pets. Hair and dander clog filters fast.
  • Someone has allergies or asthma.
  • It’s pollen season. Chattanooga’s spring pollen coats everything yellow, including your filter.
  • You’re remodeling. Drywall and sawdust can clog a filter in days.
  • You smoke or burn candles often.
  • The system runs nonstop during a heat wave or cold snap.

What MERV rating should you buy?

MERV ratings run from 1 to 16 for residential filters. Higher numbers catch smaller particles but also restrict more airflow.

  • MERV 1–4: fiberglass filters. Protect the equipment, not much else.
  • MERV 8–11: the sweet spot for most homes. Good at catching dust, pollen, and pet dander without choking airflow.
  • MERV 13+: better filtration, but best in systems designed for it, often with a thicker media filter.

If you’re buying a 1-inch filter, MERV 8 to 11 is a safe choice.

What happens if the filter gets clogged?

A dirty filter does more than let dust through:

  • Higher energy bills, because the blower works harder to pull air
  • Furnace overheating, which can trip a safety switch and leave you with cold air
  • Frozen AC coils in summer from too little airflow
  • Shorter equipment life from the extra strain

We see a lot of service calls that a $10 filter would have prevented.

How do you change it?

  1. Turn the system off at the thermostat.
  2. Find the filter slot at the furnace or air handler, or behind the return grille.
  3. Note the size printed on the old filter’s frame.
  4. Slide in the new one with the arrow pointing toward the furnace (the direction air flows).
  5. Write the date on the frame so you know when you changed it.

A filter is also one of the things we check on every seasonal tune-up. If you’re not sure which filter your system takes, ask us on your next visit.

Frequently asked questions

What happens if I never change my air filter?

Airflow drops, your energy bill goes up, and the system works harder. A furnace can overheat and shut off, and an air conditioner's coil can freeze. Over time it shortens the life of the equipment.

Is a higher MERV rating always better?

No. Very high MERV filters can restrict airflow in systems that weren't designed for them. MERV 8 to 11 suits most homes. If someone in the house has serious allergies, ask us about a thicker media filter cabinet.

Which way does the arrow on the filter go?

The arrow points in the direction of airflow, toward the furnace or air handler and away from the return grille.

Where is my air filter?

Usually in a slot on the furnace or air handler, or behind a return air grille in a wall or ceiling. Some homes have more than one.

About the author

Sturdi Home Solutions is a family-owned heating and cooling company in Chattanooga, TN. We install, repair, and maintain AC, furnace, and heat pump systems across the Chattanooga area at fair, upfront prices.

Keep reading

All articles →

Ready for honest HVAC service at a fair price?